Products

wire rope clips

Short Description:

Name:  Wire Rope Clip
Material: Alloy steel
Place of Origin: Hebei, China
Brand Name: HengOu
Packing: Customizable
Technology: Casting
Body Material: Carbon Steel
Surface: Electro Galvanized,Spray Painting
Delivery time:  15-30 days after payment

down load to pdf


Share

Detail

Tags

Read More About u bolt for wire rope

Read More About wire u clamp

 

Read More About u bolt clips

Read More About u clips for wire

Precautions for the use of wire rope clamps: They should not be used for a long time, but should be regularly inspected and scrapped, and should not be reused.

(1) The size of the clamp head should be suitable for the thickness of the steel wire rope, and the inner clear distance of the U-shaped ring should be 1-3 mm larger than the diameter of the steel wire rope. If the clear distance is too large, it is not easy to tighten the rope.

(2) When using, tighten the U-bolt until the wire rope is compressed by about one-third. Due to the deformation of the steel wire rope after being subjected to force, the rope should be tightened for a second time after being clamped onto the steel wire rope to ensure the reliability of the joint. If it is necessary to check whether the rope clamp slides after being subjected to force, an additional safety rope clamp can be used. The safety rope clamp is installed about 500mm away from the last rope clamp. After releasing a safety bend at the end of the rope, it is clamped with the main rope. This way, if the clamp slides, the safety bend will be straightened, making it easy to detect and reinforce at any time.

(3) The spacing between rope clamps is generally about 6-7 times the diameter of the steel wire rope. The rope clamps should be arranged in a straight line, with the U-shaped ring part clamped on one side of the rope head and the pressure plate placed on one side of the main rope.

 (4) Correct quantity and method of arrangement:

The number of rope clips is generally not less than 3-5, and the spacing between rope clips should be ≥ 6 times the diameter of the steel wire rope. The distance between the last clip and the rope head should be ≥ 140mm, and the number of clips depends on the diameter of the steel wire rope,

Set 3 for ≤ 18mm,

Set 4 pieces at 18-26mm,

Set 5 pieces for 26-36mm,

Set up 6 units at 36-44mm,

Set 7 pieces for 44-60mm.

(5) Steel wire rope clamps should be used together. When the rope diameter is below 19mm, there should be no less than 3 rope clamps, and when the rope diameter is 19-32mm, there should be no less than 4 rope clamps. The spacing between rope clamps is generally about 6-8 times the diameter of the steel wire rope. The rope clamps should be arranged in a straight line, with the U-shaped ring part clamped on one side of the rope head and the pressure plate placed on one side of the main rope.

After the installation of the steel wire rope clamp, it should be checked for looseness after being loaded for the first and second time. In general, the nut needs to be further tightened.

 

Read More About u clips for wire

factory

packing&delivery

about us

Send your message to us:



If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


Asset 3

Need Help?
Drop us a message using the form below.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.