Operating Guide for G80 hook series
G80 product plays a very important role in rigging and lifting industry which including eye hooks, clevis hooks, self-locking hooks, swivel hooks, sling hooks, eye slip hook with safety latch slip hooks, and so on.
For cranes, the hook is a very important device, and it is directly related to the lifting. Let's take a look at how to use the G80 hook correctly:
(1) G80 hooks cannot be cast, and trapped castings are prone to quality defects and cannot guarantee the mechanical properties of the materials;
(2) The general G80 hook is forged from a single piece of steel. The surface should be smooth. There must be no defects such as cracks, nicks, cracks, and sharp corners. Not allowed to wear or crack.
The hook is repaired and repaired. The hooks after repair welding will become brittle. The accident caused the fracture after breaking;(3) Weld hooks and steel hooks cannot be used. Because the G80 hook is subjected to a large impact load when the brake is applied. Therefore, the strength cannot be used too high. Made of materials with low impact toughness.
(4) Use the rope buckle hook to hang the rope buckle to the bottom of the hook. Use the G80 hook to hook the loop of the component. G80 hooks can't be hard or twisted. In order to prevent the hook from being deformed or straightened, the member is detached.
Russian 
English 
Arabic 
Belarusian 
Bengali 
Bosnian 
Bulgarian 
Czech 
Esperanto 
French 
Frisian 
Galician 
German 
Gujarati 
Hausa 
Hebrew 
Hindi 
Igbo 
Indonesian 
Italian 
Japanese 
Kannada 
Kazakh 
Khmer 
Korean 
Kurdish 
Kyrgyz 
Lao 
Malay 
Marathi 
Myanmar 
Nepali 
Norwegian 
Occitan 
Persian 
Portuguese 
Romanian 
Slovak 
Spanish 
Swedish 
Tagalog 
Tamil 
Telugu 
Thai 
Turkish 
Turkmen 
Ukrainian 
Urdu 
Uzbek 
Vietnamese